New Plug and Play Motion System at IMTS

Visit Rollon at in the East Building at booth E-4528

Hackettstown, NJ - Rollon Corporation will be demonstrating its pre-engineered cartesian robot system, Motion Box, at this year's IMTS. Designed to deliver users six different motion profiles that can be set-up and running in a couple of hours, Motion Box includes everything from the human-machine interface (HMI) on one side to the output of reliable motion on the other end, including cable management.

The initial system setup is already complete so end-users can get parts moving in a reliable and repeatable manner. Motion Box has six pre-programmed motion profiles to suit more than 80% of all Cartesian motion applications from 12x12x12 inches up to 60x40x20 inches.
Rick Wood, Managing Director, Rollon Corporation, commented, "Even if you start with a basic set up, gantry systems often require more than 100 hours of engineering activity, including specifying dozens of parts across many vendors. With countless failure points and a multitude of suppliers, its hard to know who to call when something goes wrong. Generally, the end user calls the system integrator or distributor, hoping for adequate post-sale technical support and troubleshooting."
"Our alternative is a pre-engineered Cartesian robot with the mechanical system and controls already in place and ready to go. Using an out-of-the-box Cartesian like Motion Box enables users to work with a single vendor for advice and troubleshooting needs, with just one part number per item. Buying a part and buying a robot become a similar task, making both initial specification and setup fast and easy."
For more information visit www.rollonmotionbox.com

Featured Product

T.J. Davies' Retention Knobs

T.J. Davies' Retention Knobs

Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.