NK Technologies Introduces New AGV Ground Fault Relay Designed for Variable Speed Driven Loads
NK Technologies released a new AGV Series Ground Fault Relay with the ability to detect faults to earth on the load side of a variable frequency drive. This unique capability addresses a challenge caused by the carrier or switching frequency of the drive. (Typically, the fault current will be detected at the base frequency, which determines the motor speed.) While many variable frequency drives have ground fault detection built-in, the detection level is the same as the overcurrent limit - that approach will shut down the drive, but only after considerable damage to the motor has occurred. In comparison, the AGV will trip at a fraction of the motor's full load current. Its design allows the sensor to trip at a choice of 30, 50, or 100 mA to current to earth.
KOGANEI Expands Motion Control Capabilities with Air Picker and Air Gripper Components
- KOGANEI International America, Inc., has added Air Picker and Air Gripper (Bridgestone Series) components to their selection of high performance pneumatic grippers. These versatile rubber end effectors are designed to handle workpieces securely, gently, and with precision. Air Picker and Air Gripper have numerous factory automation and warehouse applications, including picking, transporting, and loading products, as well as sealing and stopper fitting.
KOGANEI's Air Picker and Air Gripper offer several advantages over conventional grippers:
1. Larger contact area provides more secure, precise, and gentle holding for fragile objects
2. Significantly lighter and capable of carrying a load 25 to 100 times their own weight
3. Multiple workpiece sizes can be handled with the same unit - no need to change gripping chuck for each product diameter
Sakuu Poised to Unlock Mainstream Adoption of Electric Vehicles with World's First EV Battery 3D Printer
- New multi-material, multi-process additive manufacturing platform solves issues of performance and cost, using 50% fewer materials to deliver up to twice the energy capacity in the same space or the same energy in half the space
- High-volume production of complex functional devices for a host of other applications, also enabled
Graham Packaging Releases 2020 Sustainability Report
Industry-leading packaging company highlights successes on numerous initiatives despite the challenges created by COVID-19.
binder USA Adds Flexibility to Key M12 and M16 Connectors with New Shielded, Right-Angle Housing Design
Binder USA, LP, has enhanced several series of its M12 and M16 circular connectors with a shielded, two-part right-angle housing design. The new right-angle design meets the growing need for increasingly compact and flexible connector solutions. The improved sealing concept, together with easier installation in constrained spaces, expands the range of usage for these connectors beyond automation engineering to: sensor technology, actuators, data transmission, power supply, measuring equipment, and control systems applications.
The air purifier that eliminates all viruses, now and in the future
Covid-19 emptied the offices, but after the first euphoria of teleworking, people are now feeling lonely working at home. It would, however, have been possible to safely continue working in physical teams with the aid of Genano's innovative air purification system, which is the only one on the market to remove ultrafine particles down to 0,003 µm.
Allied Motion Releases New Motion Control Design Guide for Surgical Robots
Allied Motion Technologies released a new guide to its custom motion control solutions for advanced medical robot applications. The guide highlights several motors, drives, and control systems, and the advantages of each for specific applications. Allied's industry experience, co-design and development process, ISO 13485 certified production facilities, and global supply chain are also covered.
New ThinkIQ VisualOps Solution to Accelerate Industry 4.0
VisualOps will help manufacturers achieve digital transformation goals
Jabmo Releases the CMO's Guide to Account-Based Marketing
The white paper intends to help B2B marketers in the global manufacturing and life sciences industries grow key account engagement and revenue with a whole new approach to marketing.
Q.E.D Announces Huberg Product Line in the Americas
State-of-the-art natural gas detection instruments now available
Ultra Motion Actuators Help Measure The Moon At 70,000 Feet
Two Ultra Motion Servo Cylinders were successfully employed to control the telescope's elevation and azimuth throughout the flights. The ARTEMIS system had to operate flawlessly at 70,000 feet and in ambient temperatures as low as -60°C.
New spare parts platform set to revolutionise industrial purchasing
To date, Machine Compare has identified £5B worth of unused, surplus and obsolete spare parts across manufacturing plantations worldwide - a figure estimated to be far greater. However, discussions on this topic remain sparse within manufacturing.
Three emerging trends in the global laser material market by 2026
According to Global Market Insights, Inc., the worldwide laser materials market is estimated to exceed USD 1.56 billion mark by 2026.
Digital platform launches first service to compare prices on robots
Businesses worldwide can now for the first time easily get offers and compare prices on products and services related to industrial robots. The new service from HowToRobot.com will make it easier and cheaper for businesses to have a robot according to CEO, Søren Peters.
CIRCOR announces RTK® Discharge and Pump Protection Control Valve
Cutting Cost and Preventing Damage with Two Valves in One
Records 691 to 705 of 2136
First | Previous | Next | Last
Featured Product
T.J. Davies' Retention Knobs
Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.
