Samsung to provide 'smart factory' solution in South Korea
Cho Mu-hyun for ZDNet: Samsung Electronics will provide its smart factory solution for over a thousand small and medium-sized businesses in South Korea by 2017, the company announced.
The South Korean tech giant will first provide the solution to 224 firms selected by the Center for Creative Economy & Innovation (CCEI), a state-run startup and small businesses accelerator program, starting this month.
The CCEI has centres nationwide and works with almost all South Korean conglomerates to fund and support small enterprises with potential.
Samsung will provide these firms with manufacturing execution systems and enterprise resource planning solutions. It will also provide its IT-based manufacturing solutions such as automated manufacturing, process 3D simulations, and CAD/CAM super-precision moulding machines.
The firm plans to provide 450 companies with the solutions this year and over 1,000 by next year. Cont'd...
Republican-Leaning Cities Are At Greater Risk Of Job Automation
​ By Jed Kolko for Five Thirty Eight: More and more work activities and even entire jobs are at risk of beingautomated by algorithms, computers and robots, raising concerns that more and more humans will be put out of work. The fear of automation is widespread — President Obama cited it as the No. 1 reason Americans feel anxious about the economy in his State of the Union address last month — but its effects are not equally distributed, creating challenges for workers and policymakers. An analysis of where jobs are most likely to face automation shows that areas that voted Republican in the last presidential election are more at risk, suggesting that automation could become a partisan issue.
So-called “routine” jobs — those that “can be accomplished by following explicit rules” — are most at risk of automation. These include both “manual” routine occupations, such as metalworkers and truck drivers, and “cognitive” routine occupations, such as cashiers and customer service reps.1 Whereas many routine jobs tend to be middle-wage, non-routine jobs include both higher-wage managerial and professional occupations and lower-wage service jobs. Cont'd...
The making of: BionicANTs
What do ants and Industry 4.0 have in common? What challenges faced the engineers when it came to developing these delicate technology platforms? Take a look behind the scenes and dive into the world of the Bionic Learning Network... ( cont'd )
Industrial IoT Market Nears $132 Billion in 2020: Technavio
Pedro Hernandez for Datamation:  The Internet of Things (IoT) is expected to have a major, efficiency- and productivity-enhancing impact on how manufacturers and other companies in industrial settings conduct businesses. A new forecast from market research firm Technavio paints a rosy picture for IT vendors that specialize in industrial IoT.
According to the analyst group, the market for industrial IoT software and services will reach nearly $132 in 2020. Between now and then, the market will expand at a compound annual growth rate (CAGR) of 7 percent.
In terms of demand, Technavio has identified the Asia-Pacific (APAC) region as the largest market for industrial IoT.
Last year, the industrial IoT market generated $38 billion in sales in the region, a number that will reach $54 billion in 2020. APAC countries are investing heavily, including South Korea, which plans to pour over $3.6 billion into the IoT by 2020. Â Cont'd...
Nobilia uses IoT to create smart factory
Kitchen maker Nobilia has rolled out IoT and automation systems in its German factories to enable real-time tracking of furniture as it progresses through the manufacturing process.
The company, which has distribution in Australia, is using Beckhoff automation technology that is powered by Intel processors.
A barcode that is attached to furniture is encoded with details including processing steps, components required to be added to complete it, and logistics information such as where the finished product is to be delivered.
“Each processing machine scans the barcode and retrieves the associated machining data from a central database. Data connecting the whole factory together makes it possible to produce 2700 kitchens daily,” Intel said in a blog post.
“Through real-time tracking enabled by Intel IoT technologies, Nobilia knows exactly where each part is in the production process at any time.
“If one of the manufacturing lines shuts down, parts are automatically rerouted to another line.”
Industry 4.0: What businesses need to know
By Barclay Ballard for ITProPortal: In order for businesses to prepare for Industry 4.0, they first need to understand the technological driving forces behind it, including the Internet of Things. Although mainstream examples of IoT devices are relatively limited at the moment, in the future connected objects are expected to revolutionise a whole host of business sectors. In the same way that new manufacturing processes brought about huge upheaval during the Industrial Revolution, the Internet of Things is also predicted to bring wholesale changes to industry.
“The Industrial Internet of Things (IIoT) has been described as a crucial step in the Fourth Industrial Revolution or Industry 4.0,” explains Martyn Williams, managing director of industrial automation software expert, COPA-DATA UK. “Using IoT technology, organisations are developing smarter infrastructures and building connected networks across entire manufacturing processes.”
Some of the key changes predicted to emerge as the Internet of Things is adopted by industrial firms include the following: Cont'd...
UK 'risks losing out in Industry 4.0 race'
By PRW: A leading trade body has warned that a lack of government planning was threatening the UK’s position at the forefront of Industry 4.0, also known as the fourth industrial revolution.
A number of plastics companies in the UK and on the Continent have begun to develop products and processes that take into account developments in and around Industry 4.0 – also known as the ‘Internet of Things’.
However research conducted by manufacturers’ organisation the EEF found that while 91% of companies surveyed believed that internet access was as important to their business as electricity and water supplies more than half reckoned connectivity was inadequate for the future.
While the awareness of how important the internet was to a company’s operation was seen as a positive, the EEF highlighted that poor digital connectivity may prove to become a drag on future growth.
Many companies were already having to pay a premium to ensure they had high-speed access, the trade body said. Cont'd...
Boy, do Fanuc and Cisco have a deal for your factory
Fanuc and Cisco Systems are set to commercialize a technology this summer that promises glitch- and disruption-free factory operations. The Internet of Things-based system monitors machinery and spots signs of possible abnormalities so that parts can be replaced more smoothly and without affecting operations.
A one-minute suspension at a car factory generally costs around 2 million yen ($16,900). If, for example, a gear breaks and operations are halted for 60 minutes to replace it, the costs would be 120 million yen. Frequent line stoppages could also affect product quality.
The Fanuc-Cisco system uses sensors attached to each robot carrying or welding parts to monitor temperatures, vibration and other conditions. Data streams are sent via the Internet. A computer analyzes the data and decides which parts will likely need fixing and when. The system also places orders for replacements. The accuracy of the system's prediction and analysis functions will increase as data accumulates, representatives from the companies said. Cont'd...
U.S. official sees more cyber attacks on industrial control systems
Jim Finkle for Reuters: A U.S. government cyber security official warned that authorities have seen an increase in attacks that penetrate industrial control system networks over the past year, and said they are vulnerable because they are exposed to the Internet.
Industrial control systems are computers that control operations of industrial processes, from energy plants and steel mills to cookie factories and breweries.
“We see more and more that are gaining access to that control system layer," said Marty Edwards, who runs the Department of Homeland Security's Industrial Control Systems Cyber Emergency Response Team, or ICS-CERT.
ICS-CERT helps U.S. firms investigate suspected cyber attacks on industrial control systems as well as corporate networks.
Interest in critical infrastructure security has surged since late last month when Ukraine authorities blamed a power outage on a cyber attack from Russia, which would make it the first known power outage caused by a cyber attack. Cont'd...
Thoughts turn to revolution in Davos
By Matthew Allen for SWI: Intelligent robots and drones, 3D printers, self-driving vehicles, data mountains, smart production lines, fintech and blockchain – the fourth industrial revolution is here. The World Economic Forum’s (WEF) annual Davos meeting will ponder the potential, limitations and societal impacts of “Industry 4.0”.
Will the transformation of the workplace create jobs or unemployment? Will it close the gap between industrialised and developing economies, rich and poor - or widen it? For Swiss firms, can the new technological revolution ease the pressures of the strong franc?
Speaking ahead of the annual meeting in Davos, WEF founder Klaus Schwab called on world leaders to revise policies to accommodate the coming changes. “We are not yet sufficiently prepared for this fourth industrial revolution that will come over us like a tsunami and will change whole systems,” he said.
“My fear is that if we are not prepared we will create a world where particularly the middle class is frozen out. That would lead to a new problem of social exclusion that we absolutely have to avoid.” Cont'd...
For Advanced Manufacturing, Success Demands Innovation, Education and Public-Private Partnership
MICHAEL D. WHEELER for Photonics.com: Global manufacturing has undergone enormous changes in the past decade as many developing countries have joined the club of tier-one manufacturing nations, a recession stalled demand, and employment fell precipitously in leading economies. Yet manufacturing remains critical to the future of both developing and advanced worlds, driving innovation, productivity and competitiveness, and offering a pathway out of poverty.
Recent attention has focused on “advanced manufacturing,” which replaces traditional labor-intensive processes with ones based on the newest technologies. It encompasses a family of activities that depends on information, computation, software, sensing and networking, while making use of cutting-edge materials and emerging capabilities such as nanotechnology.
Advanced manufacturing is an especially potent propellant of future economic growth, distinguished by continual process improvement and rapid new product introduction. These critical features will lead to the building of lighter, more fuel-efficient automobiles, the creation of “needleless” tests for medical conditions like diabetes, and the fabrication of semiconductors with 10 times the current processing power. Cont'd...
What Robots and AI Learned in 2015
By Will Knight for MIT Technology Review: The robots didn’t really take over in 2015, but at times it felt as if that might be where we’re headed.
There were signs that machines will soon take over manual work that currently requires human skill. Early in the year details emerged of a contest organized by Amazon to help robots do more work inside its vast product fulfillment centers.
The Amazon Picking challenge, as the event was called, was held at a prominent robotics conference later in the year. Teams competed for a $25,000 prize by designing a robot to identify and grasp items from one of Amazon’s storage shelves as quickly as possible (the winner picked and packed 10 items in 20 minutes). This might seem a trivial task for human workers, but figuring out how to grasp different objects arranged haphazardly on shelves in a real warehouse is still a formidable challenge for robot-kind. Cont'd...
Google to incubate its robotics and drone divisions under Google X
By Mike Wheatley for SiliconAngle: Google is planning an organizational reshuffle that will see its secretive robotics department and drone business folded into its Google X labs.
Google’s robotics division, and the drone group it created when it acquired Titan Aerospace in 2014, will both fall under the Google X umbrella when the reshuffle takes place some time next year, Re/Code reported.
Google X is the secretive part of Google that develops some of its most futuristic, bleeding edge technologies. These include its famous self-driving cars, Project Loon (Wi-Fi hot air balloons), and its airborne wind turbines. Google X operates as a standalone company under Google’s parent Alphabet Inc., which was created following Google’s corporate restructuring earlier this year.
Google X’s projects are largely experimental and extremely uncertain in terms of a business model. Nevertheless, Google obviously deems it the best place to be for its robotics division, which has been left leaderless ever since Andy Rubin quit the Web giant last year. Previously, there was speculation that the robotics division may become a standalone company under Alphabet, but today’s news would indicate that’s not going to happen any time soon. Cont'd...
Building the Steam Controller
From Valve:
When we first started designing hardware at Valve, we decided we wanted to try and do the manufacturing as well. To achieve our goal of a flexible controller, we felt it was important to have a similar amount of flexibility in our manufacturing process, and that meant looking into automated assembly lines. It turns out that most consumer hardware of this kind still has humans involved in stages throughout manufacturing, but we kind of went overboard, and built one of the largest fully automated assembly lines in the US. Our film crew recently put together a video of that assembly line, showcasing exactly why robots are awesome.
Think You Know Industrial Robots? Think Again
Jim Lawton for Forbes: Peter Drucker said “Culture eats strategy for breakfast” and in my experience there’s no industry where that wisdom holds more true than manufacturing. I’m not a hardened cynic, just a pragmatist, having spent the majority of my career bringing technology that disrupts the status quo – from inventory optimization and managing risk in the supply base to collaborative robots. Manufacturers are among the most skeptical buyers and for good reason – what they do is hard, complex and things are done the way they are done because it’s been proven to work. There are times though when the opportunity to transform the business is so compelling that – as Drucker said – executives need to spend whatever time is necessary to tear down the cultural barriers that are getting in the way of the strategy that capitalizes on the moment.
In the category of robotics and industrial automation, now is one of those times. It’s been more than 50 years since Unimate went to work at a GM plant unloading heavy parts and welding them onto automobile frames. Manufacturing has changed a lot and today is on an evolutionary path toward the 4th industrial revolution. Unfortunately, while executives may be ready to move quickly toward the factories of the future for first mover advantage, many automation engineers remain entrenched in 20th century thinking about robots — when they were highly customized solutions, designed to perform one task over and over again, with a price tag to match. Cont'd...
Records 556 to 570 of 580
First | Previous | Next | Last
Automation & IIoT - Featured Product
Thermal Seal Inspection for Improved Quality and Efficiency
MoviTHERM's Thermal Seal Inspection (TSI) solution provides precise and reliable detection of defects in a variety of packaging types, including pouches, bags, blister packs, bottle caps, and more. By detecting defects in your packages, the TSI solution helps increase efficiency in your production line and ensures top-quality packaging is delivered to your customers every time. With state-of-the-art technology and an experienced team, MoviTHERM is dedicated to delivering accurate inspection solutions and peace of mind to its clients. Contact MoviTHERM today to learn more about their thermal seal inspection solution.
