NETZSCH to highlight TORNADO® T1 Pump and NEMO® B.Max Mixing Pump at Biogas Americas 2023

NETZSCH will showcase its industry leading pumps in booth 622.

NETZSCH Pumps USA will be showcasing its NEMO® B.Max Mixing Pump, TORNADO® T1 Rotary Lobe pump, and N.Mac twin-shaft grinder at Biogas Americas, booth 622 from May 16-18, 2023 in Chicago, Illinois.

The TORNADO® T1 Rotary Lobe pump is designed to produce high flow at low to medium pressures in a small compact package. The TORNADO T1 pump can handle a wide range of viscosities, solids, temperature, abrasion, and corrosive/acidic process fluids and environments. The TORNADO T1 pump is extremely versatile for just about any orientation and installation. Its robust design offers longevity, operational flexibility, and dry-run capabilities. It allows the pump to operate and handle many upset process conditions without causing harm to the pump. The pumps are available up to over 4000 gpm and up to 130 psi.
With its maximum mixing and conveying capabilities for bio substrates, the NEMO® B.Max has set a new standard for the biogas industry. NETZSCH's continued work on the NEMO® progressing cavity pump with hopper and conveying screw has resulted in this achievement. The product is particularly well suited for ground biowaste and food waste, as well as fermented NAWARO, liquid manure, pre-processed slaughterhouse waste, co-substrates, concentrated substrates, and slop.
The NEMO® B.Max optimizes product feeding to conveying elements with its pump housing's large rectangular hopper, removable conical force-feed chamber, and coupling rod with patented, horizontally positioned conveying screw. Maximum mixing of the substrate is also achieved by the conveying flights on the feeding auger. Other advantages include increased gas production, continuous low-pulsation conveyance that is independent of pressure and viscosity, as well as high pressure capability, robust drive seals, and low investment and operating costs with high operating safety.

Featured Product

T.J. Davies' Retention Knobs

T.J. Davies' Retention Knobs

Our retention knobs are manufactured above international standards or to machine builder specifications. Retention knobs are manufactured utilizing AMS-6274/AISI-8620 alloy steel drawn in the United States. Threads are single-pointed on our lathes while manufacturing all other retention knob features to ensure high concentricity. Our process ensures that our threads are balanced (lead in/lead out at 180 degrees.) Each retention knob is carburized (hardened) to 58-62HRC, and case depth is .020-.030. Core hardness 40HRC. Each retention knob is coated utilizing a hot black oxide coating to military specifications. Our retention knobs are 100% covered in black oxide to prevent rust. All retention knob surfaces (not just mating surfaces) have a precision finish of 32 RMA micro or better: ISO grade 6N. Each retention knob is magnetic particle tested and tested at 2.5 times the pulling force of the drawbar. Certifications are maintained for each step in the manufacturing process for traceability.